Yodify DEC Brand Library
LS-6/LS-7 Single-Point Level Switch
LS-6/LS-7 Single-Point Level Switch
Brand: Gems Sensors, Inc
The LS-6 is a very compact level switch that protrudes into a tank less than 1-1/2". Polypropylene and stainless steel wetted parts provide broad chemical and potable water applications.
An SPDT relay enables this LS-7 to control two independent loads up to 5 amps each. Switching N.O. for one load and N.C. for the other. This unit is designed to operate with a load connected to each of the two outputs.
These loads must be 10 watts, minimum, for correct SPDT switching. One load used alone must be connected to the N.O. terminal. With this load, which may be less than 10 watts, the unit will operate the same as an SPST unit.
Specifications
Brand
Applications
- Broad Chemical for LS-6
- Potabla Water for LS-6
Electrical - Free Leads
- 22 AWG for LS-6
Electrical Contacts
- Normally Closed
- Normally Open
Electrical Rating
- 1/3 hp at 120 Vac for LS-7
- 5 A at 240 Vac Resistive for LS-7
- 5 A at 248 Vdc Resistive for LS-7
- 50 VA for LS-6
Enclosure, Body Material
- Polypropylene
Fluid Specific Gravity
- 0.55 for LS-7
Load
- < 10 W for LS-7
Maximum System Pressure
- psi: 100 (kPa: 689, bar: 6.89) at 21° C (70° F)
Mounting Position
- Horizontally through A 1/2" Diameter Hole for LS-6
NPT Connection
- 1/2" NPT Male for LS-7
Operating Temperature
- -40° to 107° C (-40° to 225° F) for LS-6
- -40° to 121° C (-40° to 250° F) for LS-7
PT/PF/PS (JIS) Connection
- 1/4" PF Male for LS-6
Relay Output
- Junction-Box with 5 A Relay: 120 Vac, 50/60 Hz for LS-7
Sensor / Probe Style
- Float
Stem Material
- Polypropylene for LS-6
Switch Type
- SPDT for LS-7
- SPST for LS-6
Wetted Materials
- Float: Polypropylene
- Retaining Clip: Stainless Steel
Documentation
Brand-Managed Distributed Enterprise Catalogs (DEC)
for Authorized Channel Partners
for Authorized Channel Partners
Book a DEC Demo