Yodify DEC Brand Library
P3T Tool
P3T Tool
Brand: Steelhaus Technologies IncAn integral component of the Precision System, the P3T Tool is designed to measure push, pull, pressure and temperatures during annular FRAC operations.
Tubing and annulus pressures are measured, stored in memory and downloaded at surface on retrieval of the Annular FRAC BHA.
Sand face timed events are referenced to the continual surface log which is also a digital record (FBSE) of all surface recorded times, events and statistics.
Forces, pressure and temperature data is reliably captured via the onboard sensors up to 20 samples per second. Data can be recorded up to days continuously by the P3T Tool.
Features- Electronics (including batteries) rated to 185 F [85 C]
- Pressure transducer rated to measure 15k
- Overrated for burst pressure and 1.5 multiplier for over-range protection
- Measures both internal and external pressures
- Maximum push/pull 85,000 lbs
- OD of Tool 3.25”
- Short 21” tool length
- Available in a variety of alloys based on customer requirements/application
Specifications
Maximum OD, in (mm)
- 3.25 [82.55]
Min I.D., in (mm)
- .90 [22.86]
Maximum Pressure, psi (Mpa)
- 15,000 [103]
Maximum Temp °F (°C)
- 185 [85]
Tool Length, Inches (mm)
- 21.15 [537.21]
Tensile/Compression lbs (daN)
- 85,000 [37,810]
Torque ft-lbs
- 750
Battery Life
- 1 wk @ 20 Hz sample rate
Documentation
Data Sheet
Brand-Managed Distributed Enterprise Catalogs (DEC)
for Authorized Channel Partners
for Authorized Channel Partners
Book a DEC Demo